Effect of Semi-solid Isothermal Heat Treatment on Microstructure of VW63Z Alloy

The effects of isothermal heat treatment on the semi-solid microstructure evolution of VW63Z (Mg-6Gd-3Y-0.4Zr, wt.%) alloy are studied. It shows that the microstructure of VW63Z alloy could transform from equiaxed crystal to semi-solid spherical crystal after isothermal heat treatment above 620 ºC. With the heating temperature elevating from 620 ºC to 635 ºC and the holding time prolonging from 10 min to 35 min, the liquid fraction increases gradually. The semi-solid microstructure evolution of VW63Z alloy can be divided into three stages, i.e., particle coarsening and spheroidization;particle necking, coalescence, and Ostwald ripening;and dynamic equilibrium. The semi-solid process window of VW63Z alloy ranges from 620 ºC to 635 ºC, where the best process parameters are holding at 635 ºC for 20 min?30 min. The solid fraction, the average particle size, and the shape factor are 41.1%?53.8%, 81.5 μm?83.2 μm, and 0.70?0.75, respectively. The maximum relative deviations of the solid fraction, the particle size, and the shape factor at different heights of the same billet are 44.6%, 17.4%, and 16.6%, respectively, which means that it should pay attention to the uniformity of edge and core of VW63Z alloy during isothermal heat treatment. The driving force of microstructure is supposed to be the reduction of solid-liquid interface free energy.     

喷流对飞机尾流涡影响的试验研究

飞机产生的尾流涡,特别是大尺度的翼尖涡,对尾随其后的飞行器是非常有害的,本文旨在探索利用飞机发动机产生的喷流加速尾流涡消亡的方法。试验采用简化的飞机模型(有尾翼),建立了包含一对翼尖涡及一对反向旋转的尾翼涡(通过以负迎角安装尾翼得到)的4涡尾流系统。在无外来扰动的情况下,不同的尾翼设置下得到的尾翼涡对翼尖涡的作用效果不同,有的能导致翼尖涡提前消亡,有的则不能。考察了不同强度的喷流对不同4涡尾流系统的影响,且作为对比,对无尾翼(2涡系统)及无喷流下的各种情况也分别作了观测。试验在拖曳水槽中进行,运用体视粒子图像测速(SPIV)技术,观测了与模型拖曳方向垂直的、从机翼后缘到下游约45翼展间均布的一系列切面。结果表明:当喷流直接作用于涡时,其效果主要取决于两者之间的初始距离及相对强度;而当喷流作用于整个4涡尾流系统时,其引入的扰动对不同的系统均能起到一定程度的改善作用,这种作用的关键在于利用喷流优化对翼尖涡进行扰动的机制,而不仅仅取决于喷流的强度。     

Is the presence of oxygen on an exoplanet a reliable biosignature?

We revisit the validity of the presence of O(2) or O(3) in the atmosphere of a rocky planet as being a biosignature. Up to now, the false positive that has been identified applies to a planet during a hot greenhouse runaway, which is restricted to planets outside the habitable zone (HZ) of the star that are closer to the star. In this paper, we explore a new possibility based on abiotic photogeneration of O(2) at the surface of a planet that could occur inside the HZ. The search for such a process is an active field of laboratory investigation that has resulted from an ongoing interest in finding efficient systems with the capacity to harvest solar energy on Earth. Although such a process is energetically viable, we find it to be a very unlikely explanation for the observation of O(2) or O(3) in the atmosphere of a telluric exoplanet in the HZ. It requires an efficient photocatalyst to be present and abundant under natural planetary conditions, which appears unlikely according to our discussion of known mineral photochemical processes. In contrast, a biological system that synthesizes its constituents from abundant raw materials and energy has the inherent adaptation advantage to become widespread and dominant (Darwinist argument). Thus, O(2) appears to continue to be a good biosignature.     

干涉测量宽带相关处理算法与验证

阐述了一种用于航天器精确角位置测量的干涉测量宽带相关信号处理算法,通过仿真验证了算法的有效性,并搭建卫星干涉测量实验系统,采集某地球同步卫星信号进行宽带相关信号处理,获得清晰干涉条纹,准确估计出反映测站与卫星位置关系的时延观测量。结果表明宽带相关信号处理的估计时延与卫星信号链路标定时延、测距时延组成系统时延闭合回路,初步验证了干涉测量实验系统的有效性,为后续飞行任务中航天器高精度干涉测量积累了技术和经验。     

Experimental investigation of hot and cold side jet interaction with a supersonic cross-flow

This paper reports on experimental aerodynamic investigations on a high-speed missile with side jet control especially with regard to the interaction of cold and hot side jets with supersonic cross-flow. The hot jets were generated with solid propellants. To analyze the effect of the hot jet in relation to side jet control, wall pressure distributions were measured in the area of jet interaction. As a test parameter, the jet pressure ratio was varied and schlieren images were taken to visualize the shocks. In addition, the development of large-scale vortex structures on hot gas jets was detected with high-speed videos. The frame sequences show periodical turbulent jet structures and permit the manual evaluation of their spatial distribution. Analyzing the images, the convection velocities of the large-scale structures and their convection angles were determined. The convection velocities reach the magnitude of cross-flow velocity shortly behind the hot jet exit.     

飞机尾流控制的SPIV实验研究

利用简化的飞机模型,通过改变尾翼的迎角及展弦比,试图建立一种能加速自我消亡的尾流涡系统.该实验在拖曳水槽中进行,运用SPIV(体视粒子图像测速技术)系统进行测量,获得了一系列空间切面的2D/3C(二维/三分量)数据,给出了三种不同尾翼情况(两种有尾翼情况及一种无尾翼情况)下的SPIV观测结果,并将这几种情况作了对比.     

Millimeter wave radiation sources visible in solar corona

Coronal millimeter wave sources (CMMS) have been observed at radio frequencies 22–90 GHz (at wavelengths 3–13 mm). The observed CMMS have been classified into three different categories according to their time scale and relation to other wave-length events. The CMMS indicate enhancement of electron density in the corona, as well as magnetic loop structures. The CMMS are evidence of dynamical processes taking place at the lower levels of the corona, propagating into the higher levels.     

Net electric power of concentrating solar mirror systems for application in space as a function of the distance to the sun

The use of solar radiation by means of concentrating solar mirror systems, such as parabolic and spheric configurations, mainly is an engineering problem. A decisive characteristic for the optimisation of a complete system with turboelectric power conversion is the thermal cycle applied. Besides the Carnot process, here taken up into the study as an ideal comparative process, suitable processes for the technological realisation are the Brayton process and the Rankine process. The Brayton process is a typical gas turbine process using only the gaseous phase. The Rankine process is a steam engine process using liquid and gaseous phase.The work in hand shows how such solar systems with turboelectric conversion are optimised with respect to their specific weight (kg/kW_e) and how the distance to the sun as well as technological data enter into the analysis.As expected, the Carnot cycle as an ideal comparative process for both types of systems shows the best results for the optimum specific mass of the system. Regarding the real processes, the Rankine cycle shows more favourable characteristics than the Brayton cycle. The difference of the specific masses of the real processes mainly results from the different thermal conditions at the radiator.The influence of the distance to the sun is as expected. The nearer to the sun the solar power system operates, the better is the optimum specific mass of the system. For distances to the sun between 0.3 and 1.0 AU the spheric system shows a better behaviour than the parabolic system. For distances to the sun greater than 2.0 AU the parabolic system shows better behaviour of the specific weight. In the region between 1 and 2 AU the better optimum specific mass of the system belongs to the technological data used in the analysis.     

EXOSAT observations of the iron line emission of Her X-l during a 35 day cycle

In March/April 1984 eleven EXOSAT observations of Her X-1 were performed sampling a full 35 day cycle. Spectral analysis of the ME and GSPC data shows that the iron line emission is present during all phases. During the main-on state we see an iron line at 6.65 ± 0.07 keV with a FWHM of 1–2 keV and an equivalent width of 300 to 400 eV. The high resolution GSPC data indicate that the line profiles have external wings and are not simple Gaussian. We report for the first time on the detection of an iron line during the intermediate-on state with about the same parameters as the main-on state line but an equivalent width a factor of 2 larger. During the off state between main-on and intermediate-on we detected a broad iron line feature at about 6.0 keV with an equivalent width of 2 keV. We discuss the Alfven region and a hot corona at the inner region of the accretion disk as the possible sites of the line production.     

Comparison of nuclear and solar power plants with turboelectric generators for application in space

The aim of the analysis is to determine and to compare the specific mass of nuclear and solar power plants for application in space depending on technological data as well as on data subject to the mission.On the basis of the known theory of Ruppe and Blumenberg[1–3], nuclear power plants with turboelectric generators as well as solar-thermal power plants with parabolic or spheric mirrors are being analysed. The following thermodynamic processes are applied: the Rankine process, the Brayton process and—as an ideal comparative process—the Carnot process. An important parameter of the analysis for nuclear power plants is the net electric power, for the solar-thermal power plant the distance to the sun is of importance.